How do you fix MacBook Error Code 50?

The MacBook error code 50 indicates that it was unable to copy or transfer files from external storage devices. The entire procedure becomes stalled, with no observable progress. At the same time, if your Mac fails to remove specific files, error 50 may reappear.

What is MacBook Error Code 50?

You may encounter a problem while transferring a file on your Mac device. You may receive Mac error code 50 or Western digital error code 50 when attempting to transfer the file. In the list of Mac error codes, it is one of the most prevalent problems.

This issue usually occurs while transferring files from an external drive. The system becomes trapped in an unmanageable file. This post will provide you with detailed information about MacBook error code 50. We will talk about what causes this error code and how to fix it.

What is causing MacBook Error Code 50?

Several situations might lead to the development of error code 50:

Corrupt drive files

You could run into this error owing to a corruption issue on the disc that presently has the file you are attempting to move or copy in some conditions. In this situation, you should use Disk utility’s First Aid function to address the problem.

Stuck temporary file

The most typical cause of this problem is a corrupted temporary file that is reliant on the file system. In this scenario, a simple reboot should erase the temp folder, fixing the problem as well.

OS firmware issue

If you have a recurring temp file problem, you are unlikely to be able to resolve it using traditional methods. In this situation, a power cycle method is the best option, it will drain the power capacitors and delete any type of temporary information.

Corrupt NVRAM and PRAM data

The problem might be caused by one of these two types of memory that your MAC computer uses. If this is the case, you should be able to resolve the problem by resetting these two memory formats.

Flash drive error

If you are having trouble copying files from the external drive, it’s probably because it is formatted in NTFS. If this is the case, you should be able to resolve the problem by reformatting the disc to FAT 32.

Methods to fix the MacBook Error Code 50

Rename the file

In certain situations, the Mac Error Code 50 is generated by a name or extension problem, which is most frequently aided by a registry value that clashes with the data displayed by the Finder program. Some individuals who were experiencing the same problem reported that they were able to resolve the problem by renaming the file, altering the extension, and then transferring it.

If the file is successfully moved, simply rename it with the original extension and the issue will be resolved. This solution is useful in cases where the file’s metadata is to blame for the problem. Follow the steps below to rename a file:

  1. Go to the location where the file that is causing the MacBook Error Code 50 is stored by using the Finder program.
  2. Now right-click it and select Rename from the menu that appears.
  3. Rename it anything you like once the name is changeable, but do not forget to change the extension to a new file format, for example: .txt
  4. Next, you will be asked to approve the change in extension. When this occurs, select Use.text to switch to the new extension form.
  5. Then, try whether you can move the file to the new place without receiving the same error notice.
  6. Rename the file to the old name and convert the extension back to the original when it has been successfully transferred to a different location.

Re-plug the drive

The issue of MacBook Error Code 50 may also occur when copying or transferring files from an external hard drive, unplug the disc from the Mac and then reconnect it. It is conceivable that the drive was not properly mounted or that the Mac was not reading it correctly, resulting in this error while trying to manage the contents on that drive.

Know more: How to connect external hard drive to iPad?

Restart your MacBook

Another simplest solution is to reboot or restart your MacBook. As a result of the restart, the temp folder will be cleared, resolving the issue. Follow the instructions below:

  1. In the top left corner, select the Apple symbol.
  2. Choose the Restart option and allow some time for the system to perform it.
  3. Nevertheless, if the firmware failure is caused by a persistent temp file malfunction, rebooting the computer will not solve the issue. Follow the steps:
  4. You must execute a power cycle operation at this time.
  5. Disconnect any external devices from your Mac.
  6. Next, at the upper left, select the Apple symbol.
  7. Click the Shut Down option.
  8. Allow for the shutdown procedure to finish.
  9. Disconnect the power cable and wait at least 30 seconds before reconnecting it.
  10. Next, plug in the power cable once again.
  11. Then, restart your MacBook

Change power settings

If the ways mentioned above did not work, try adjusting the power settings:

  1. First, select System Preferences from the menu.
  2. Next, choose the Energy Saver option from menu.
  3. Select the option that read ” Put the hard disks to sleep when possibleā€
  4. Finally, click the “OK” button.

Sudeepta is a Professional Content developer, Editor, Proofreader, Social Media Marketer, Creative and Technical Content Writer. She is a Blogger, Nature lover, and budding Photographer from Assam who is passionate about words, food, and travel.

Leave a Comment

Disclaimer: All are independently owned and operated. All product and company names are trademarks of their respective holders. iPhone, iPad, iPod, iPod touch, Mac and iMac are registered trademarks and property of Apple, Inc. is a third-party company and is not affiliated with Apple.